https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/22.214.171.124 Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that. Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap. We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout. Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.
Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now. Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date. The transition height is also when the team requirement will be relaxed for the network.
Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.
The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use. There are so many goodies here it is hard to summarize them all. I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures. The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!
Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.
Network magnitude unit pinned to a static value of 0.25
Max research reward allowed per block raised to 16384 GRC (from 12750 GRC)
New CPIDs begin accruing research rewards from the first superblock that contains the CPID instead of from the time of the beacon advertisement
500 GRC research reward limit for a CPID's first stake
6-month expiration for unclaimed rewards
10-block spacing requirement between research reward claims
Rolling 5-day payment-per-day limit
Legacy tolerances for floating-point error and time drift
The need to include a valid copy of a CPID's magnitude in a claim
10-block emission adjustment interval for the magnitude unit
One-time beacon activation requires that participants temporarily change their usernames to a verification code at one whitelisted BOINC project
Verification codes of pending beacons expire after 3 days
Self-service beacon removal
Burn fee for beacon advertisement increased from 0.00001 GRC to 0.5 GRC
Rain addresses derived from beacon keys instead of a default wallet address
Beacon expiration determined as of the current block instead of the previous block
The ability for developers to remove beacons
The ability to sign research reward claims with non-current but unexpired beacons
As a reminder:
Beacons expire after 6 months pass (180 days)
Beacons can be renewed after 5 months pass (150 days)
Renewed beacons must be signed with the same key as the original beacon
Magnitudes less than 1 include two fractional places
Magnitudes greater than or equal to 1 but less than 10 include one fractional place
A valid superblock must match a scraper convergence
Superblock popularity election mechanics
Yes/no/abstain and single-choice response types (no user-facing support yet)
To create a poll, a maximum of 250 UTXOs for a single address must add up to 100000 GRC. These are selected from the largest downwards.
Burn fee for creating polls scaled by the number of UTXOs claimed
50 GRC for a poll contract
0.001 GRC per claimed UTXO
Burn fee for casting votes scaled by the number of UTXOs claimed
0.01 GRC for a vote contract
0.01 GRC to claim magnitude
0.01 GRC per claimed address
0.001 GRC per claimed UTXO
Maximum length of a poll title: 80 characters
Maximum length of a poll question: 100 characters
Maximum length of a poll discussion website URL: 100 characters
Maximum number of poll choices: 20
Maximum length of a poll choice label: 100 characters
Magnitude, CPID count, and participant count poll weight types
The ability for developers to remove polls and votes
[126.96.36.199] 2020-09-03, mandatory, "Fern"
Backport newer uint256 types from Bitcoin #1570 (@cyrossignol)
Implement project level rain for rainbymagnitude #1580 (@jamescowens)
Upgrade utilities (Update checker and snapshot downloadeapplication) #1576 (@iFoggz)
Provide fees collected in the block by the miner #1601 (@iFoggz)
Add support for generating legacy superblocks from scraper stats #1603 (@cyrossignol)
Port of the Bitcoin Logger to Gridcoin #1600 (@jamescowens)
Implement zapwallettxes #1605 (@jamescowens)
Implements a global event filter to suppress help question mark #1609 (@jamescowens)
Add next target difficulty to RPC output #1615 (@cyrossignol)
Add caching for block hashes to CBlock #1624 (@cyrossignol)
Make toolbars and tray icon red for testnet #1637 (@jamescowens)
Add an rpc call convergencereport #1643 (@jamescowens)
Implement newline filter on config file read in #1645 (@jamescowens)
Implement beacon status icon/button #1646 (@jamescowens)
Add gridcointestnet.png #1649 (@caraka)
Add precision to support magnitudes less than 1 #1651 (@cyrossignol)
Replace research accrual calculations with superblock snapshots #1657 (@cyrossignol)
Publish example gridcoinresearch.conf as a md document to the doc directory #1662 (@jamescowens)
Add options checkbox to disable transaction notifications #1666 (@jamescowens)
Add support for self-service beacon deletion #1695 (@cyrossignol)
Add support for type-specific contract fee amounts #1698 (@cyrossignol)
Add verifiedbeaconreport and pendingbeaconreport #1696 (@jamescowens)
Add preliminary testing option for block v11 height on testnet #1706 (@cyrossignol)
Add verified beacons manifest part to superblock validator #1711 (@cyrossignol)
Implement beacon, vote, and superblock display categories/icons in UI transaction model #1717 (@jamescowens)
So Ive been playing the game for a little over a month now. My initial impression was, "finally the gacha game Ive been looking for." It is actually a game instead of a character manager with auto everything. The story has been great and it has been fun exploring new areas. I completed part 1 and Im now working on Ogre wars 1. However, as great as the game has been so far, there is one thing that Im struggling to do, the dungeon grind. My characters are good enough that I can complete the dungeons, but not good enough that I can just auto attack my way through everything. So Im literally repeating the same abilities in the same order, over and over and over and over. Im starting to feel like Im manually mining bitcoin for Wright Flyer Studios and GREE. It's not challenging, and it is not fun. Im honestly at the point where I cant use my dungeon keys everyday because I cannot bare going back into the same %#@^@ dungeons and doing the same key presses over and over and over. For example I lucked into Myunfa (game over easy mode) as my first 5*. So my combat is switch to Myunfa, cast all my earth spells, listen to Myunfa say the same thing she says every damn time I switch to her, watch the banner tell me the earth zone is active, then finally put a gun in my mouth cause I have to watch this 30 times every dungeon. When Im playing through the story content there is breaks and pauses so I can forget the combat grind, but in dungeons its tea kettle comments and pain. Anyway, Im starting to find out that this is pretty much what the game is if I want to continue to improve my characters. So my first question, am I missing something? Is there a way to achieve the grind materials without running the same dungeons over and over? Also is there some way I can get Tsubura gems without running VH dungeons over and over? At least with Tsubura gems I can make some character improvements over time. Like for example it would be absolutely amazing if I could trade in my dungeon keys for Tsubura gems. When I first saw the Tsubura gem merchant, my first thought was thank god, I can trade my keys for gems and not have to run dungeons!! Here take my keys and give me 5 gems a pop, anything to skip running dungeons all night. But no, its the other way around!!! I can only trade gems for more keys!! We are mining bitcoin for this company, Im almost positive. Anyway, jokes aside, that was my qol idea. Trade keys for gems. Any input on how I can streamline this process would be great. I was looking through the subreddit, but I cant find anything that speeds up combat other than the repeat button. Appreciate any tips or tricks people may have. *Edit 9/3/2020* So after reading a lot of the responses, a common response is, focus on something else (netflix, podcast, pron, etc.). A completely valid response, and a good idea if you want to grind (especially since there does not appear to be any other method and all you can do is improve your party and therefore your clear speed). And this response (focus on something else) seems to also come from people who genuinely enjoy the grind and the game as well. But I can't help but point out that I think this is also strong criticism towards the dungeon grind end game. Given how long this game has been out, I am a bit surprised that the developers haven't come up with some new ideas that maybe preserve some of the time commitment but also make the process fun. Like I said above, Im new to this game, and it did not take me long to experience the tedium. Anyway, I appreciate the ideas posted below, and for now it looks like I will just have to find a way to make the grind process faster through better characters and combinations of characters. Cause I can deal with a couple cups a tea a day, but by god I cant do 30 an hour. #Myunfawillwaterboardyouwithtea
Why Osana takes so long? (Programmer's point of view on current situation)
I decided to write a comment about «Why Osana takes so long?» somewhere and what can be done to shorten this time. It turned into a long essay. Here's TL;DR of it:
The cost of never paying down this technical debt is clear; eventually the cost to deliver functionality will become so slow that it is easy for a well-designed competitive software product to overtake the badly-designed software in terms of features. In my experience, badly designed software can also lead to a more stressed engineering workforce, in turn leading higher staff churn (which in turn affects costs and productivity when delivering features). Additionally, due to the complexity in a given codebase, the ability to accurately estimate work will also disappear. Junade Ali, Mastering PHP Design Patterns (2016)
Longer version: I am not sure if people here wanted an explanation from a real developer who works with C and with relatively large projects, but I am going to do it nonetheless. I am not much interested in Yandere Simulator nor in this genre in general, but this particular development has a lot to learn from for any fellow programmers and software engineers to ensure that they'll never end up in Alex's situation, especially considering that he is definitely not the first one to got himself knee-deep in the development hell (do you remember Star Citizen?) and he is definitely not the last one. On the one hand, people see that Alex works incredibly slowly, equivalent of, like, one hour per day, comparing it with, say, Papers, Please, the game that was developed in nine months from start to finish by one guy. On the other hand, Alex himself most likely thinks that he works until complete exhaustion each day. In fact, I highly suspect that both those sentences are correct! Because of the mistakes made during early development stages, which are highly unlikely to be fixed due to the pressure put on the developer right now and due to his overall approach to coding, cost to add any relatively large feature (e.g. Osana) can be pretty much comparable to the cost of creating a fan game from start to finish. Trust me, I've seen his leaked source code (don't tell anybody about that) and I know what I am talking about. The largest problem in Yandere Simulator right now is its super slow development. So, without further ado, let's talk about how «implementing the low hanging fruit» crippled the development and, more importantly, what would have been an ideal course of action from my point of view to get out. I'll try to explain things in the easiest terms possible.
else if's and lack any sort of refactoring in general
Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away. Antoine de Saint-Exupéry
This is why refactoring — activity of rewriting your old code so it does the same thing, but does it quicker, in a more generic way, in less lines or simpler — is so powerful. In my experience, you can only keep one module/class/whatever in your brain if it does not exceed ~1000 lines, maybe ~1500. Splitting 17000-line-long class into smaller classes probably won't improve performance at all, but it will make working with parts of this class way easier. Is it too late now to start refactoring? Of course NO: better late than never.
If you think that you wrote this code, so you'll always easily remember it, I have some bad news for you: you won't. In my experience, one week and that's it. That's why comments are so crucial. It is not necessary to put a ton of comments everywhere, but just a general idea will help you out in the future. Even if you think that It Just Works™ and you'll never ever need to fix it. Time spent to write and debug one line of code almost always exceeds time to write one comment in large-scale projects. Moreover, the best code is the code that is self-evident. In the example above, what the hell does (float) 6 mean? Why not wrap it around into the constant with a good, self-descriptive name? Again, it won't affect performance, since C# compiler is smart enough to silently remove this constant from the real code and place its value into the method invocation directly. Such constants are here for you. I rewrote my code above a little bit to illustrate this. With those comments, you don't have to remember your code at all, since its functionality is outlined in two tiny lines of comments above it. Moreover, even a person with zero knowledge in programming will figure out the purpose of this code. It took me less than half a minute to write those comments, but it'll probably save me quite a lot of time of figuring out «what was I thinking back then» one day. Is it too late now to start adding comments? Again, of course NO. Don't be lazy and redirect all your typing from «debunk» page (which pretty much does the opposite of debunking, but who am I to judge you here?) into some useful comments.
This is often neglected, but consider the following. You wrote some code, you ran your game, you saw a new bug. Was it introduced right now? Is it a problem in your older code which has shown up just because you have never actually used it until now? Where should you search for it? You have no idea, and you have one painful debugging session ahead. Just imagine how easier it would be if you've had some routines which automatically execute after each build and check that environment is still sane and nothing broke on a fundamental level. This is called unit testing, and yes, unit tests won't be able to catch all your bugs, but even getting 20% of bugs identified at the earlier stage is a huge boon to development speed. Is it too late now to start adding unit tests? Kinda YES and NO at the same time. Unit testing works best if it covers the majority of project's code. On the other side, a journey of a thousand miles begins with a single step. If you decide to start refactoring your code, writing a unit test before refactoring will help you to prove to yourself that you have not broken anything without the need of running the game at all.
This is basically pretty self-explanatory. You set this thing once, you forget about it. Static code analyzer is another «free estate» to speed up the development process by finding tiny little errors, mostly silly typos (do you think that you are good enough in finding them? Well, good luck catching x << 4; in place of x <<= 4; buried deep in C code by eye!). Again, this is not a silver bullet, it is another tool which will help you out with debugging a little bit along with the debugger, unit tests and other things. You need every little bit of help here. Is it too late now to hook up static code analyzer? Obviously NO.
Say, you want to build Osana, but then you decided to implement some feature, e.g. Snap Mode. By doing this you have maybe made your game a little bit better, but what you have just essentially done is complicated your life, because now you should also write Osana code for Snap Mode. The way game architecture is done right now, easter eggs code is deeply interleaved with game logic, which leads to code «spaghettifying», which in turn slows down the addition of new features, because one has to consider how this feature would work alongside each and every old feature and easter egg. Even if it is just gazing over one line per easter egg, it adds up to the mess, slowly but surely. A lot of people mention that developer should have been doing it in object-oritented way. However, there is no silver bullet in programming. It does not matter that much if you are doing it object-oriented way or usual procedural way; you can theoretically write, say, AI routines on functional (e.g. LISP)) or even logical language if you are brave enough (e.g. Prolog). You can even invent your own tiny programming language! The only thing that matters is code quality and avoiding the so-called shotgun surgery situation, which plagues Yandere Simulator from top to bottom right now. Is there a way of adding a new feature without interfering with your older code (e.g. by creating a child class which will encapsulate all the things you need, for example)? Go for it, this feature is basically «free» for you. Otherwise you'd better think twice before doing this, because you are going into the «technical debt» territory, borrowing your time from the future by saying «I'll maybe optimize it later» and «a thousand more lines probably won't slow me down in the future that much, right?». Technical debt will incur interest on its own that you'll have to pay. Basically, the entire situation around Osana right now is just a huge tale about how just «interest» incurred by technical debt can control the entire project, like the tail wiggling the dog. I won't elaborate here further, since it'll take me an even larger post to fully describe what's wrong about Yandere Simulator's code architecture. Is it too late to rebuild code architecture? Sadly, YES, although it should be possible to split Student class into descendants by using hooks for individual students. However, code architecture can be improved by a vast margin if you start removing easter eggs and features like Snap Mode that currently bloat Yandere Simulator. I know it is going to be painful, but it is the only way to improve code quality here and now. This will simplify the code, and this will make it easier for you to add the «real» features, like Osana or whatever you'd like to accomplish. If you'll ever want them back, you can track them down in Git history and re-implement them one by one, hopefully without performing the shotgun surgery this time.
Again, I won't be talking about the performance, since you can debug your game on 20 FPS as well as on 60 FPS, but this is a very different story. Yandere Simulator is huge. Once you fixed a bug, you want to test it, right? And your workflow right now probably looks like this:
Fix the code (unavoidable time loss)
Rebuild the project (can take a loooong time)
Load your game (can take a loooong time)
Test it (unavoidable time loss, unless another bug has popped up via unit testing, code analyzer etc.)
And you can fix it. For instance, I know that Yandere Simulator makes all the students' photos during loading. Why should that be done there? Why not either move it to project building stage by adding build hook so Unity does that for you during full project rebuild, or, even better, why not disable it completely or replace with «PLACEHOLDER» text for debug builds? Each second spent watching the loading screen will be rightfully interpreted as «son is not coding» by the community. Is it too late to reduce loading times? Hell NO.
Or any other continuous integration tool. «Rebuild a project» can take a long time too, and what can we do about that? Let me give you an idea. Buy a new PC. Get a 32-core Threadripper, 32 GB of fastest RAM you can afford and a cool motherboard which would support all of that (of course, Ryzen/i5/Celeron/i386/Raspberry Pi is fine too, but the faster, the better). The rest is not necessary, e.g. a barely functional second hand video card burned out by bitcoin mining is fine. You set up another PC in your room. You connect it to your network. You set up ramdisk to speed things up even more. You properly set up Jenkins) on this PC. From now on, Jenkins cares about the rest: tracking your Git repository, (re)building process, large and time-consuming unit tests, invoking static code analyzer, profiling, generating reports and whatever else you can and want to hook up. More importantly, you can fix another bug while Jenkins is rebuilding the project for the previous one et cetera. In general, continuous integration is a great technology to quickly track down errors that were introduced in previous versions, attempting to avoid those kinds of bug hunting sessions. I am highly unsure if continuous integration is needed for 10000-20000 source lines long projects, but things can be different as soon as we step into the 100k+ territory, and Yandere Simulator by now has approximately 150k+ source lines of code. I think that probably continuous integration might be well worth it for Yandere Simulator. Is it too late to add continuous integration?NO, albeit it is going to take some time and skills to set up.
Stop caring about the criticism
Stop comparing Alex to Scott Cawton. IMO Alex is very similar to the person known as SgtMarkIV, the developer of Brutal Doom, who is also a notorious edgelord who, for example, also once told somebody to kill himself, just like… However, being a horrible person, SgtMarkIV does his job. He simply does not care much about public opinion. That's the difference.
I’m a commentator for a tournament of nightmares. I’m not sure the participants are willing.
You’d think being a psychiatric ward for 38 months would be enough to deter a guy from ever going back to a sport that involves watching human beings at the height of their physical prowess beat the living shit out of each other. Sometimes regulated, sometimes not. But, here I am, fresh outta the loony bin and reading the most unusual advertising slogan I’d ever laid eyes on; “The most terrifying tournament has come around once again! Conquer your fears in theNFC*…* literally.” This was the business card that accompanied my black envelope as it was handed to me on the discharge ward by a well dressed and gangly fella with an uncomfortable wide smile. He didn’t say much of anything, just that his name was “Watson” before bowing and holding up the envelope. “Heh, like the butler, right?” I said, taking the envelope from his plasticine hands. His smile ripples across his face and he nods slowly, his perfect hair unmoving in the strong wind before he turns on his heel and walks back to the black sedan. The cold air chilled my bones, and I pulled the medical bracelet from my wrist, grimacing at the marks underneath before following Watson to the Sedan and hauling my luggage into the trunk before setting off, not knowing how I came to even be there in the first place. I guess right now, that doesn’t really matter. What matters is where I am now and what I’m doing. "blood strewn across the canvas, frayed brain matter sailing across my head and splattering against the wall, a woman standing in a pool of blood as the deformed creature twitches on the ground" My name is Sal “Motormouth” Sabotta, I’m a sports commentator by trade. Be it combat sports, pro wrestling, death-matches or martial arts tournament, I’ve done it all. I won’t lie; Work can be hard to come by. I’ve spent months struggling for rent and resorting to less tried-and-true commentary methods in order to survive. That has, at times, involved trying my hand at some of the more underground competitions; unregulated fights, sick, illegal games bet on by people on the dark web and worse… Things I’m not going to detail here. Things I’m not proud to have taken a hefty pay-check for from greasy, sweaty fucks in Armani tracksuits and stinking of cheap booze and coke all the way up to well-dressed bitcoin farmers in their 20s who probably own child slaves. In short, I’m no stranger to the grim underworld or the secrecies with which they conduct their work. I see money and an easy way to make it with my voice; I don’t ask questions. So when I received an email the day of my discharge from the hospital and I’m told “you’ll receive a letter from Mr. Watson, take it and follow the instructions to the venue. Pay up front as agreed.”, I don’t question it. Especially when the note is personalised, and the doctor says my medical fees were covered. We drove past numerous landscapes, vistas and neighbourhoods before veering off into an industrial estate and entering an underground tunnel. Half a mile in, Watson stops the car and peers back, smiling. He directs a thumb to the service door in the side tunnel and rubs his neck, a scar running from ear to ear. Was he a former fighter? Gangster? I sighed and got out, still in my medical gown and hauling ass to the door. It opened before I could reach out and a tall, muscular woman in her late 30s greeted me with a smile. She was imposing, powerful in her gait, a black eyepatch with several seals adorning the sides accompanying a thick scar down her face did nothing to stop her beauty. She wore a tank top with a black cloak with white fur on the tops and sleeves, a thick black chain clasp around the neck. I won’t lie; she looked badass. Terrifying, but badass. “‘Bout time ya showed up, Sabotta!” She grinned and put a cinderblock of a hand on my shoulder. I’m 5’10 and 180lbs, but she made me feel like a child in front of her. The power emanating from her fist was unbelievable. “C’mon, the trial match is starting and I don’t want no tourney without a broken in commentator! You gotta know the ropes of this place!” “You know your driver was standing right outside when I was discharged, right? Couldn’t think to give me an extra day or two to freshen up?” I frowned. This wasn’t normal protocol, even for back-alley promotions like this. She just laughed at me and slapped my shoulder. “The tournament waits for nobody, Sal. Times a-wasting.” The hallway is dimly lit and the sounds of a ruckus above us are as impossible to ignore as the sounds of thudding, screaming and snapping. As we pass several doors with one-way mirrors on the front panes, I hear sounds I could have never placed in the animal kingdom or otherwise; gurgles, clicks, grunts and even otherworldly whispers. “What the fuck is that? You guys doing animal fights down here? I mean I called a monkey fight once, but it’s not exactly… pleasant.” I shuddered, thinking of the violence chimpanzees can inflict on one another, let alone humans. She never stopped walking or staring directly ahead when she responded.“Those ain’t animals. Not by a long shot.” Before I can probe further, I’m hurried into a changing room and practically swept off my feet by her strength. I turn back and she’s already poking her head out the door. “You’ve got 5 minutes, get your shit and head up the left stairs, Watson will guide you.” She grinned, and I saw gold filings in her teeth that glinted as much as her bedazzled eye patch. “Ya came highly recommended… I expect good things!” I do as instructed and within 5 minutes I’m back in my commentary clothes; an open buttoned Hawaiian shirt with my old Hotel Inertia shirt underneath, skinny black jeans and shimmering black shoes. I found some old slick gorilla powder in my hair and dusted it up, opting for the dishevelled look as I knew I’d be sweating by the end of the ordeal. “You shouldn’t bother putting in so much effort, y’know. They’re not gonna care how good you look, only how well you talk.” Standing in the doorway was a woman in her 40s, dark-skinned and hair clad in meticulous dreadlocks, tied back into a large bun with a pair draped down the sides of her head. She held a thick book in one hand and pocketed a serrated blade in the other before motioning to me. “We’ll have to do the pleasantries on the way, the match is starting and you don’t wanna miss that. The commissioner isn’t the type you want to upset. Especially when you’re not here by choice.” I looked for a moment, dumbfounded. “I’m here because I was invited, already got my pay from the woman who let me in.” I shrugged, pocketing the envelope and getting my equipment from the suitcase. The woman gave a sad smile and shook her head. “Of course you’d think that. She likes it that way. Bet she didn’t introduce herself either, did she? C’mon.” I follow her down and after a few minutes we come to a fork in the hallway, an elevator system to our right and a stairway to the left. Dutifully, Watson stood patiently, still grinning and motioning us to go up. Once we’re situated in our booth upstairs, I set my equipment up and look down at the table, expecting a slew of papers and fighter information in front of me. I look to the woman to ask, but she doesn’t break her stare in the darkness, looking down at the arena floor some 100ft below us.“You won’t need that. Not for this match.” The lights flicker on and the enormity of this venue reveals itself to me. It’s a structure of imposing steel, dried blood, claw marks and other unknown substances that littered the 40ft wide circular pit the fighters contested in, a black lift on either side from the fighters corners that I can only assume ascended up from their locker room area. Around them were chain-link fences that rose up to the audience stands above, situating around 300 people across all four sides. At the very top sat our booth, the commissioner’s office directly opposite, the judges booth to our right and the fight analysts/medical area to our left. Standing in the centre with a spotlight over them was the commissioner, microphone in hand and an energy that was almost palpable. “Ladies, Gentlemen and Freaks of all kinds out there in the universe. I welcome you once more to the annual Nightmare Fighting Championship Tournament! It’s been a long year, but we have new blood to pit against our resident night terrors and some fresh fears to feast on the fortuitous soul that frolics into their den. As always, our contestants will be fighting for their freedom, a chance to get their wish or to fight for the ultimate prize.” The crowd cheers and the majority are hidden behind thick plexiglass and lighting, but I can see some have Karate Gi’s, weapons in hand and others with demon masks as they whoop and holler. The clientele here were, at least in my estimation, experienced. But I was feeling a lump in my throat at that one phrase The Commissioner so surreptitiously added in without issue; “As always, our contestants will befightingfor theirfreedom*”* I leaned to the woman next to me and as if she knew what I was going to ask; she put a finger up and shook her head. Eyes awash with fear and a grimness I had only seen on that of trainers who knew their fighter was not ready for the bout ahead. She pointed the finger down to my machine, then to the pit. Turning it on, I looked down as the commissioner began to talk, readying myself to commentate on whatever weirdos came up to battle. “But before we get to that, we have an exciting exhibition match for our loyal supporters who bankroll this event every year. Without you elite few, we could not do this. You are the pound for pound goats of support! Now, without further ado; let’s get this show on the road!”The rest of the lights clicked on and spun around the venue as they raised the profile of the bout, the elevators both whirring into action as the right one arose first. “In this corner, from the marionettes shop and accompanied by his Bunraku doll “Mr. Stares”, it’s the man who pulls the strings… THE PUPPET MAN!” Out steps a tall, thin Japanese man in full clown makeup. His head shaven save for two ridiculous strands of hair stretched out and fluffed up to their limits, like red antennae. His eyebrows large m’s that practically cover his forehead, the nose a completely vacant slot with a black hole drawn in and the mouth… the fucking mouth was nailed shut. Literally. Sharp rusted nails had been hammered down through the lips with such force that they’d bent. A sickening crimson red face-paint stretched across the entire bottom half of his face, making it seem far larger by comparison. He carefully held a small bundle underneath a sheet and bowed deeply to the audience before standing at his designated spot. “In the other corner, from the streets of god knows where and the womb of someone who misses him… "Hulked Up" Michael O’Donnell!” I watched with wide eyes and a stomach threatening to evacuate its contents at any moment as the smoke cleared and a boy no older than 17 rushed out, beating his chest and screaming to the crowd as if he was the Incredible Hulk. I don’t know if they drugged the poor kid, but he clearly had no idea where he was. “There are no rules, no referees and judges only exist in case of a draw or unclear victory. Our commentary team will take over and we wish you a phenomenal match.” She drools a little before she speaks again, looking up at me and winking. “Let’s make this a violent one.” She snaps her fingers and leaps for the fence, climbing up with ungodly ease before sitting on her makeshift chair in her office. I have no idea what I’m seeing but every cell in my body is urging me to run; I feel my knees tense and my frame rise ever so slightly before the woman next to me puts her hand on my thigh, pushing me down with great force. “You have a job to do, so do I. Trust me, you think you can leave but if you get out of this chair, not only will YOUR life end. Mine will too.” She unsheathes the serrated blade and looks at me with pity. “We both have a part to play here, so put the headset on and let’s do our job, no matter how hard it is.” Hands shaking, I pick up the headset and connect it to the portable recorder and take a breath. “I… I need your name. What is it you do?” I stutter, trying to calm myself. She hands me a bottle of water as the surrounding lights dim and the spotlight focuses on the spectacle below. “I’m Madame Nelle Lockwood, cryptid hunter and your co-host to guide you through tonight. Good to meet you, Sal.” - NFC EXHIBITION MATCH: "Hulked Up" Michael O’Donnell vs The Puppet Man w/ Mr. Stares “Welcome fight fans from around the world, god knows how you’re listening to this or WHY, but here we are. I’m your host Sal “MotorMouth” Sabotta, wishing this was all a bad dream. Joining me this evening is our cryptid specialist and all round badass Madame Nelle Lockwood. How are you doing, Nelle?” She looks at me with a bewildered look on her face before blinking and coming to her senses. “Uhh… good! All things considered… boy, you really have a professional knack for this, huh? I can see why Commissioner Alduin brought you in." “Ahh, yes. That’s right, folks! NFC Commissioner Alduin invited me here personally and our exhibition match proves to be… challenging. Let’s check in on the action below.” I look down and see The Puppet Man sat down and gesturing to the figure under the sheet, like he’s got a negotiation going on. The boy, undeterred and furious, rushes towards him and takes his back, slapping his head and even pulling on his hair with extreme prejudice. “Well take a gander at that, that kid has absolutely NO fear. When I was his age, I would have stayed FAR the fuck away from a nightmare spectre like that. But hell, this is all part of the show, right? Hope they’re paying that poor guy down there a sizeable sum to throw a fight to a child. What do you think, Nelle; is this the weirdest make-a-wish fulfilment task or what?” I look over to her, hoping she’d indulge me and that I could believe this was just going to end with a pissed off actor storming away when the child hit him too hard. But Nelle was scanning her now open book and looking for information on dolls. “He’s talking to his doll because it’s desperate to be let loose. He’s trying to bargain with it to spare him. This is the nature of the puppeteer and his master.” She pushes the book to the centre of the table and shows me a faded illustration of a pristine Bunraku doll; a kind of meticulously crafted Japanese take on the ventriloquist doll. The limbs are thinner and the face is more minimalist, but still no more frightening. “They usually have a symbiotic relationship, but it seems this one obeys the doll and will not want to face more punishment.” “What do you mean more punishment?” I ask, looking back down at the feverish puppet man as he tries signing frantically under the sheet, even putting his head under as the kid bites his arm and kicks him, screeching. “The nails, Sal. Those aren’t to silence him, they’re to punish him.” The rest happened in slow motion; the sheet fell down. The puppet man stood up and walked to his side of the fighters corner, facing the elevator and placing his face into his forearms as he shook. The boy followed to keep attacking, but with one swift kick to the midsection, the boy was propelled back to the centre of the pit where the doll sat. If there was a human face, I didn’t see it. Instead, I was staring down at a small wood carved spider, the head sporting black geisha hair and the makeup still present, but rows of sharpened black teeth protruded from the clicking mouth and two larger eyes jutted out from the base of the skull, smaller ones dotted closely around it. It was like seeing a puppet ogre spider. “Looks like The Puppet Man has let Mr. Stares out to say hi and I can certainly see why he was under that sheet, this one isn’t pretty folks! The face doth fit the name. The question is, what’s he doing to do ne- “I didn’t need to finish the question. My hands shook, and the world spun around me as this creature crawled towards the still wheezing boy with ungodly speed and perched itself expertly beside him. I don’t know if it was my eyes or the distance from where I sat, but this was NOT a small puppet. He was easily half of the boy’s height and that became more unnerving when he reared up on his back legs, the head clicking up and the raspy voice hissing out like a gas leak in a building. “Hey, hey, kid! Wanna make a deal?” The kid rubbed his eyes, seemingly realising where he was as he calmed down and an air of utter confusion around him. “If you let me be your new master and you promise to take care of me, I’ll let you go!” His head spun around and the jaw clicked ferociously as he giggled, extending out a clawed paw. “Whaddya say?” The boy, still confused, slowly reached out his hand and the moment immediately reminded me of a slew of nature shows I’d seen as a kid; where a predator waits until the prey is lulled before striking. I felt the chill up my spine as he extended his hand and grabbed Mr. Stares. In that moment, he leapt up the arm and bore his way into the boy’s mouth, down his throat and shredded his flesh. The sound was so horrifying, so visceral that it outshines any backyard stabbing, joint snap or broken nose. The boy didn’t even have time to scream, he simply looked up with tear-stained eyes as the puppet disappeared. Then he started walking without him realising. He looked down at his limbs, terrified, looked over at The Puppet Master, who still had his head to the elevator and pleaded with someone, anyone to help him. I looked to Nelle who refused to take her eyes away, studying the battle in an almost morbid scientific curiosity, detached entirely from the scenario. I couldn’t fathom how she did it, how she ignored this boy begging us to get him out of there. I wanted to. Every instinct in me as a fight fan and a decent human was to scream “STOP THE FIGHT!”. But clearly, when my own life is at risk and money is involved... I am not a decent human. Instead, with bile in my throat and a sweating forehead, I did my job. “M-My goodness! The P-uppet, I mean, “Mr. Stares” has BECAME the puppet master, surely the fight will be over with our young competitor incapacitated? What does our commissioner have to say about this?” She stared at me, her one eye gleaming and her face elated with the violence. “It ain’t over yet, church boy. We haven’t even seen the finale, have we Puppet Master?!” She laughs and slaps her knee, the puppet master sobbing as he sinks to the floor and she continues. “He ain’t done feeding, not yet.” The way she said that word “feeding” nearly made me lose what food I had in me. That was a young man, somebody's baby boy… “What does she mean by that, Nelle? What is the strategy to victory here?” Nelle looked down at her book and traced her finger across a passage before wiping her forehead and pushing the locks aside. If her composure wasn’t breaking yet, it would do soon. “This kind of parasitic doll feasts on its prey and targets non-essential organs first, controls the host with the neurotoxin in its tail and then, when it’s finally content, it gives the brain a second injection.” “What happens then?” I asked, my own professionalism hanging on by a fucking thread at this point. She shook her head and pinched the bridge of her nose.“I guess you’ll see in a moment, I sure as hell don’t want to. Not again.” Before I can prompt her further, the boy lets out an ear-piercing shriek and falls to his knees, gripping at his head before it turned red, then purple and finally an ugly shade of puce before… The sound of a watermelon hitting the ground from a great height is the best comparison you’re going to get without making me want to rush to the toilet to puke for a third time. But that’s what happened. His head burst and chunks of his skull, flesh and brain matter sprayed the pit and the walls, some hitting my desk and making me audibly shriek, much to the commissioner's delight. “HA! You didn’t run! I like you, Sal. You pass for the tournament!” She hauls her body up and slams down to the pit, applauding as the microphone descends from the heavens. “And your winner; The Puppet Man and Mr. Stares!” The crowd erupts with applause as the weeping puppet man pulls the blood-soaked puppet out, places him under the sheet and silently begins to walk back to the elevator while attendees clear up the boy’s corpse. “What… what the fuck IS this place?” I ask Nelle, pausing my recording. “This is where nightmares are kept and set upon mostly unwilling competitors for the world’s amusement. You HAVE done dark web fights before, right? Mafia snitches being put into lions pits, bum fights, addicts fighting women to score… this can’t be THAT unusual to you?” I stared at her incredulously. Was that even a question? “I did the dark web ONCE and it damn sure didn’t involve monsters!” She scoffs and closes her book, stretching before looking at me with contempt. “Oh, it did. Just not the ones you hear about in fairytales. Good luck with the selection process. I’ll be back for the opening round. Don’t try to run, they’ll devour us both in minutes, if you think this is the pinnacle of what lurks beneath this club, you're in for a rough night.” She sauntered off, leaving me deflated, sickened and terrified. Unable to leave and frustrated to the point of tears that I couldn’t express that concoction of emotions, I did what I always do; I regressed and pressed “record” on the device as Commissioner Alduin continued. At that moment, however, I was deaf to it all. The gravity of the situation had fully enveloped me… They weren’t kidding about the unwilling participants, I just didn’t realise I would be one of them.On every side of me sits men and women with a desire for violence that goes beyond the norm, beyond the sane and beyond the boundaries of humanity.Below me are an untold number of creatures rattling their cages and howling for blood. Across from me is a woman so powerful she could crush my skull beneath her boot with the utmost ease if it so amused her. That invitation was nothing more than my own ransom note in pretty colours and flattering platitudes. I was in a tournament housing nightmares incarnate. And it would only get more violent from here on out. - The opening round was a blood bath.
Taproot! Everybody wants to have it, somebody wants to make it, nobody knows how to get it! (If you are asking why everybody wants it, see: Technical: Taproot: Why Activate?) (Pedants: I mostly elide over lockin times) Briefly, Taproot is that neat new thing that gets us:
Multisignatures (n-of-n, k-of-n) that are just 1 signature (1-of-1) in length!! (MuSig/Schnorr)
Better privacy!! If all contract participants can agree, just use a multisignature. If there is a dispute, show the contract publicly and have the Bitcoin network resolve it (Taproot/MAST).
Activation lets devs work get back to work on the even newer stuff like!!!
Cross-input signature aggregation!! (transaction with multiple inputs can have a single signature for all inputs) --- needs Schnorr, but some more work needed to ensure that the interactions with SCRIPT are okay.
Block validation - Schnorr signatures for all taproot spends in a block can be validated in a single operation instead of for each transaction!! Speed up validation and maybe we can actually afford to increase block sizes (maybe)!!
SIGHASH_ANYPREVOUT - you know, for Decker-Russell-Osuntokun ("eltoo") magic!!!
OP_CHECKTEMPLATEVERIFY - vaulty vaults without requiring storing signatures, just transaction details!!
So yes, let's activate taproot!
The SegWit Wars
The biggest problem with activating Taproot is PTSD from the previous softfork, SegWit. Pieter Wuille, one of the authors of the current Taproot proposal, has consistently held the position that he will not discuss activation, and will accept whatever activation process is imposed on Taproot. Other developers have expressed similar opinions. So what happened with SegWit activation that was so traumatic? SegWit used the BIP9 activation method. Let's dive into BIP9!
bit - A field in the block header, the nVersion, has a number of bits. By setting a particular bit, the miner making the block indicates that it has upgraded its software to support a particular soft fork. The bit parameter for a BIP9 activation is which bit in this nVersion is used to indicate that the miner has upgraded software for a particular soft fork.
timeout - a time limit, expressed as an end date. If this timeout is reached without sufficient number of miners signaling that they upgraded, then the activation fails and Bitcoin Core goes back to the drawing board.
Now there are other parameters (name, starttime) but they are not anywhere near as important as the above two. A number that is not a parameter, is 95%. Basically, activation of a BIP9 softfork is considered as actually succeeding if at least 95% of blocks in the last 2 weeks had the specified bit in the nVersion set. If less than 95% had this bit set before the timeout, then the upgrade fails and never goes into the network. This is not a parameter: it is a constant defined by BIP9, and developers using BIP9 activation cannot change this. So, first some simple questions and their answers:
Why not just set a day when everyone starts imposing the new rules of the softfork?
This was done classically (in the days when Satoshi was still among us). But this might argued to put too much power to developers, since there would be no way to reject an upgrade without possible bad consequences. For example, developers might package an upgrade that the users do not want, together with vital security bugfixes. Either you live without vital security bugfixes and hire some other developers to fix it for you (which can be difficult, presumably the best developers are already the ones working on the codebase) or you get the vital security bugfixes and implicitly support the upgrade you might not want.
Sure, you could fork the code yourself (the ultimate threat in the FOSS world) and hire another set of developers who aren't assholes to do the dreary maintenance work of fixing security bugs, but Bitcoin needs strong bug-for-bug compatibility so everyone should really congregate around a single codebase.
Basically: even the devs do not want this power, because they fear being coerced into putting "upgrades" that are detrimental to users. Satoshi got a pass because nobody knew who he was and how to coerce him.
Suppose the threshold were lower, like 51%. If so, after activation, somebody can disrupt the Bitcoin network by creating a transaction that is valid under the pre-softfork rules, but are invalid under the post-softfork rules. Upgraded nodes would reject it, but 49% of miners would accept it and include it in a block (which makes the block invalid) And then the same 49% would accept the invalid block and build on top of that, possibly creating a short chain of doomed invalid blocks that confirm an invalid spend. This can confuse SPV wallets, who might see multiple confirmations of a transaction and accept the funds, but later find that in fact it is invalid under the now-activated softfork rules.
Thus, a very high threshold was imposed. 95% is considered safe. 50% is definitely not safe. Due to variance in the mining process, 80% could also be potentially unsafe (i.e. 80% of blocks signaling might have a good chance of coming from only 60% of miners), so a threshold of 95% was considered "safe enough for Bitcoin work".
Why have a timeout that disables the upgrade?
Before BIP9, what was used was either flag day or BIP34. BIP34 had no flag day of activation or a bit, instead, it was just a 95% threshold to signal an nVersion value greater than a specific value. Actually, it was two thresholds: at 75%, blocks with the new nVersion would have the new softfork rules imposed, but at 95% blocks with the old nVersion would be rejected (and only the new blocks, with the new softfork rules, were accepted). For one, between 75% and 95%, there was a situation where the softfork was only "partially imposed", only blocks signaling the new rules would actually have those rules, but blocks with the old rules were still valid. This was fine for BIP34, which only added rules for miners with negligible use for non-miners.
The reasons miners signalled support was because they felt they were being pressured to signal support. So they signalled support, with plans to actually upgrade later, but because of the widespread signalling, the new BIP66 version locked in before upgrade plans were finished. Thus, the timeout that disables the upgrade was added in BIP9 to allow miners an escape hatch.
The Great Battles of the SegWit Wars
SegWit not only fixed transaction malleability, it also created a practical softforkable blocksize increase that also rebalanced weights so that the cost of spending a UTXO is about the same as the cost of creating UTXOs (and spending UTXOs is "better" since it limits the size of the UTXO set that every fullnode has to maintain). So SegWit was written, the activation was decided to be BIP9, and then.... miner signalling stalled at below 75%. Thus were the Great SegWit Wars started.
BIP9 Feature Hostage
If you are a miner with at least 5% global hashpower, you can hold a BIP9-activated softfork hostage. You might even secretly want the softfork to actually push through. But you might want to extract concession from the users and the developers. Like removing the halvening. Or raising or even removing the block size caps (which helps larger miners more than smaller miners, making it easier to become a bigger fish that eats all the smaller fishes). Or whatever. With BIP9, you can hold the softfork hostage. You just hold out and refuse to signal. You tell everyone you will signal, if and only if certain concessions are given to you. This ability by miners to hold a feature hostage was enabled because of the miner-exit allowed by the timeout on BIP9. Prior to that, miners were considered little more than expendable security guards, paid for the risk they take to secure the network, but not special in the grand scheme of Bitcoin.
ASICBoost was a novel way of optimizing SHA256 mining, by taking advantage of the structure of the 80-byte header that is hashed in order to perform proof-of-work. The details of ASICBoost are out-of-scope here but you can read about it elsewhere Here is a short summary of the two types of ASICBoost, relevant to the activation discussion.
Overt ASICBoost - Manipulates the unused bits in nVersion to reduce power consumption in mining.
Covert ASICBoost - Manipulates the order of transactions in the block to reduce power consumption in mining.
Now, "overt" means "obvious", while "covert" means hidden. Overt ASICBoost is obvious because nVersion bits that are not currently in use for BIP9 activations are usually 0 by default, so setting those bits to 1 makes it obvious that you are doing something weird (namely, Overt ASICBoost). Covert ASICBoost is non-obvious because the order of transactions in a block are up to the miner anyway, so the miner rearranging the transactions in order to get lower power consumption is not going to be detected. Unfortunately, while Overt ASICBoost was compatible with SegWit, Covert ASICBoost was not. This is because, pre-SegWit, only the block header Merkle tree committed to the transaction ordering. However, with SegWit, another Merkle tree exists, which commits to transaction ordering as well. Covert ASICBoost would require more computation to manipulate two Merkle trees, obviating the power benefits of Covert ASICBoost anyway. Now, miners want to use ASICBoost (indeed, about 60->70% of current miners probably use the Overt ASICBoost nowadays; if you have a Bitcoin fullnode running you will see the logs with lots of "60 of last 100 blocks had unexpected versions" which is exactly what you would see with the nVersion manipulation that Overt ASICBoost does). But remember: ASICBoost was, at around the time, a novel improvement. Not all miners had ASICBoost hardware. Those who did, did not want it known that they had ASICBoost hardware, and wanted to do Covert ASICBoost! But Covert ASICBoost is incompatible with SegWit, because SegWit actually has two Merkle trees of transaction data, and Covert ASICBoost works by fudging around with transaction ordering in a block, and recomputing two Merkle Trees is more expensive than recomputing just one (and loses the ASICBoost advantage). Of course, those miners that wanted Covert ASICBoost did not want to openly admit that they had ASICBoost hardware, they wanted to keep their advantage secret because miners are strongly competitive in a very tight market. And doing ASICBoost Covertly was just the ticket, but they could not work post-SegWit. Fortunately, due to the BIP9 activation process, they could hold SegWit hostage while covertly taking advantage of Covert ASICBoost!
UASF: BIP148 and BIP8
When the incompatibility between Covert ASICBoost and SegWit was realized, still, activation of SegWit stalled, and miners were still not openly claiming that ASICBoost was related to non-activation of SegWit. Eventually, a new proposal was created: BIP148. With this rule, 3 months before the end of the SegWit timeout, nodes would reject blocks that did not signal SegWit. Thus, 3 months before SegWit timeout, BIP148 would force activation of SegWit. This proposal was not accepted by Bitcoin Core, due to the shortening of the timeout (it effectively times out 3 months before the initial SegWit timeout). Instead, a fork of Bitcoin Core was created which added the patch to comply with BIP148. This was claimed as a User Activated Soft Fork, UASF, since users could freely download the alternate fork rather than sticking with the developers of Bitcoin Core. Now, BIP148 effectively is just a BIP9 activation, except at its (earlier) timeout, the new rules would be activated anyway (instead of the BIP9-mandated behavior that the upgrade is cancelled at the end of the timeout). BIP148 was actually inspired by the BIP8 proposal (the link here is a historical version; BIP8 has been updated recently, precisely in preparation for Taproot activation). BIP8 is basically BIP9, but at the end of timeout, the softfork is activated anyway rather than cancelled. This removed the ability of miners to hold the softfork hostage. At best, they can delay the activation, but not stop it entirely by holding out as in BIP9. Of course, this implies risk that not all miners have upgraded before activation, leading to possible losses for SPV users, as well as again re-pressuring miners to signal activation, possibly without the miners actually upgrading their software to properly impose the new softfork rules.
BIP91, SegWit2X, and The Aftermath
BIP148 inspired countermeasures, possibly from the Covert ASiCBoost miners, possibly from concerned users who wanted to offer concessions to miners. To this day, the common name for BIP148 - UASF - remains an emotionally-charged rallying cry for parts of the Bitcoin community. One of these was SegWit2X. This was brokered in a deal between some Bitcoin personalities at a conference in New York, and thus part of the so-called "New York Agreement" or NYA, another emotionally-charged acronym. The text of the NYA was basically:
Set up a new activation threshold at 80% signalled at bit 4 (vs bit 1 for SegWit).
When this 80% signalling was reached, miners would require that bit 1 for SegWit be signalled to achive the 95% activation needed for SegWit.
If the bit 4 signalling reached 80%, increase the block weight limit from the SegWit 4000000 to the SegWit2X 8000000, 6 months after bit 1 activation.
The first item above was coded in BIP91. Unfortunately, if you read the BIP91, independently of NYA, you might come to the conclusion that BIP91 was only about lowering the threshold to 80%. In particular, BIP91 never mentions anything about the second point above, it never mentions that bit 4 80% threshold would also signal for a later hardfork increase in weight limit. Because of this, even though there are claims that NYA (SegWit2X) reached 80% dominance, a close reading of BIP91 shows that the 80% dominance was only for SegWit activation, without necessarily a later 2x capacity hardfork (SegWit2X). This ambiguity of bit 4 (NYA says it includes a 2x capacity hardfork, BIP91 says it does not) has continued to be a thorn in blocksize debates later. Economically speaking, Bitcoin futures between SegWit and SegWit2X showed strong economic dominance in favor of SegWit (SegWit2X futures were traded at a fraction in value of SegWit futures: I personally made a tidy but small amount of money betting against SegWit2X in the futures market), so suggesting that NYA achieved 80% dominance even in mining is laughable, but the NYA text that ties bit 4 to SegWit2X still exists. Historically, BIP91 triggered which caused SegWit to activate before the BIP148 shorter timeout. BIP148 proponents continue to hold this day that it was the BIP148 shorter timeout and no-compromises-activate-on-August-1 that made miners flock to BIP91 as a face-saving tactic that actually removed the second clause of NYA. NYA supporters keep pointing to the bit 4 text in the NYA and the historical activation of BIP91 as a failed promise by Bitcoin developers.
We have discussed BIP8: roughly, it has bit and timeout, if 95% of miners signal bit it activates, at the end of timeout it activates. (EDIT: BIP8 has had recent updates: at the end of timeout it can now activate or fail. For the most part, in the below text "BIP8", means BIP8-and-activate-at-timeout, and "BIP9" means BIP8-and-fail-at-timeout) So let's take a look at Modern Softfork Activation!
Modern Softfork Activation
This is a more complex activation method, composed of BIP9 and BIP8 as supcomponents.
First have a 12-month BIP9 (fail at timeout).
If the above fails to activate, have a 6-month discussion period during which users and developers and miners discuss whether to continue to step 3.
Have a 24-month BIP8 (activate at timeout).
The total above is 42 months, if you are counting: 3.5 years worst-case activation. The logic here is that if there are no problems, BIP9 will work just fine anyway. And if there are problems, the 6-month period should weed it out. Finally, miners cannot hold the feature hostage since the 24-month BIP8 period will exist anyway.
PSA: Being Resilient to Upgrades
Software is very birttle. Anyone who has been using software for a long time has experienced something like this:
You hear a new version of your favorite software has a nice new feature.
Excited, you install the new version.
You find that the new version has subtle incompatibilities with your current workflow.
You are sad and downgrade to the older version.
You find out that the new version has changed your files in incompatible ways that the old version cannot work with anymore.
You tearfully reinstall the newer version and figure out how to get your lost productivity now that you have to adapt to a new workflow
If you are a technically-competent user, you might codify your workflow into a bunch of programs. And then you upgrade one of the external pieces of software you are using, and find that it has a subtle incompatibility with your current workflow which is based on a bunch of simple programs you wrote yourself. And if those simple programs are used as the basis of some important production system, you hve just screwed up because you upgraded software on an important production system. And well, one of the issues with new softfork activation is that if not enough people (users and miners) upgrade to the newest Bitcoin software, the security of the new softfork rules are at risk. Upgrading software of any kind is always a risk, and the more software you build on top of the software-being-upgraded, the greater you risk your tower of software collapsing while you change its foundations. So if you have some complex Bitcoin-manipulating system with Bitcoin somewhere at the foundations, consider running two Bitcoin nodes:
One is a "stable-version" Bitcoin node. Once it has synced, set it up to connect=x.x.x.x to the second node below (so that your ISP bandwidth is only spent on the second node). Use this node to run all your software: it's a stable version that you don't change for long periods of time. Enable txiindex, disable pruning, whatever your software needs.
The other is an "always-up-to-date" Bitcoin Node. Keep its stoarge down with pruning (initially sync it off the "stable-version" node). You can't use blocksonly if your "stable-version" node needs to send transactions, but otherwise this "always-up-to-date" Bitcoin node can be kept as a low-resource node, so you can run both nodes in the same machine.
When a new Bitcoin version comes up, you just upgrade the "always-up-to-date" Bitcoin node. This protects you if a future softfork activates, you will only receive valid Bitcoin blocks and transactions. Since this node has nothing running on top of it, it is just a special peer of the "stable-version" node, any software incompatibilities with your system software do not exist. Your "stable-version" Bitcoin node remains the same version until you are ready to actually upgrade this node and are prepared to rewrite most of the software you have running on top of it due to version compatibility problems. When upgrading the "always-up-to-date", you can bring it down safely and then start it later. Your "stable-version" wil keep running, disconnected from the network, but otherwise still available for whatever queries. You do need some system to stop the "always-up-to-date" node if for any reason the "stable-version" goes down (otherwisee if the "always-up-to-date" advances its pruning window past what your "stable-version" has, the "stable-version" cannot sync afterwards), but if you are technically competent enough that you need to do this, you are technically competent enough to write such a trivial monitor program (EDIT: gmax notes you can adjust the pruning window by RPC commands to help with this as well). This recommendation is from gmaxwell on IRC, by the way.
Syscoin Platform’s Great Reddit Scaling Bake-off Proposal
https://preview.redd.it/rqt2dldyg8e51.jpg?width=1044&format=pjpg&auto=webp&s=777ae9d4fbbb54c3540682b72700fc4ba3de0a44 We are excited to participate and present Syscoin Platform's ideal characteristics and capabilities towards a well-rounded Reddit Community Points solution! Our scaling solution for Reddit Community Points involves 2-way peg interoperability with Ethereum. This will provide a scalable token layer built specifically for speed and high volumes of simple value transfers at a very low cost, while providing sovereign ownership and onchain finality. Token transfers scale by taking advantage of a globally sorting mempool that provides for probabilistically secure assumptions of “as good as settled”. The opportunity here for token receivers is to have an app-layer interactivity on the speed/security tradeoff (99.9999% assurance within 10 seconds). We call this Z-DAG, and it achieves high-throughput across a mesh network topology presently composed of about 2,000 geographically dispersed full-nodes. Similar to Bitcoin, however, these nodes are incentivized to run full-nodes for the benefit of network security, through a bonded validator scheme. These nodes do not participate in the consensus of transactions or block validation any differently than other nodes and therefore do not degrade the security model of Bitcoin’s validate first then trust, across every node. Each token transfer settles on-chain. The protocol follows Bitcoin core policies so it has adequate code coverage and protocol hardening to be qualified as production quality software. It shares a significant portion of Bitcoin’s own hashpower through merged-mining. This platform as a whole can serve token microtransactions, larger settlements, and store-of-value in an ideal fashion, providing probabilistic scalability whilst remaining decentralized according to Bitcoin design. It is accessible to ERC-20 via a permissionless and trust-minimized bridge that works in both directions. The bridge and token platform are currently available on the Syscoin mainnet. This has been gaining recent attention for use by loyalty point programs and stablecoins such as Binance USD.
Syscoin Foundation identified a few paths for Reddit to leverage this infrastructure, each with trade-offs. The first provides the most cost-savings and scaling benefits at some sacrifice of token autonomy. The second offers more preservation of autonomy with a more narrow scope of cost savings than the first option, but savings even so. The third introduces more complexity than the previous two yet provides the most overall benefits. We consider the third as most viable as it enables Reddit to benefit even while retaining existing smart contract functionality. We will focus on the third option, and include the first two for good measure.
Distribution, burns and user-to-user transfers of Reddit Points are entirely carried out on the Syscoin network. This full-on approach to utilizing the Syscoin network provides the most scalability and transaction cost benefits of these scenarios. The tradeoff here is distribution and subscription handling likely migrating away from smart contracts into the application layer.
The Reddit Community Points ecosystem can continue to use existing smart contracts as they are used today on the Ethereum mainchain. Users migrate a portion of their tokens to Syscoin, the scaling network, to gain much lower fees, scalability, and a proven base layer, without sacrificing sovereign ownership. They would use Syscoin for user-to-user transfers. Tips redeemable in ten seconds or less, a high-throughput relay network, and onchain settlement at a block target of 60 seconds.
Integration between Matic Network and Syscoin Platform - similar to Syscoin’s current integration with Ethereum - will provide Reddit Community Points with EVM scalability (including the Memberships ERC777 operator) on the Matic side, and performant simple value transfers, robust decentralized security, and sovereign store-of-value on the Syscoin side. It’s “the best of both worlds”. The trade-off is more complex interoperability.
Syscoin + Matic Integration
Matic and Blockchain Foundry Inc, the public company formed by the founders of Syscoin, recently entered a partnership for joint research and business development initiatives. This is ideal for all parties as Matic Network and Syscoin Platform provide complementary utility. Syscoin offers characteristics for sovereign ownership and security based on Bitcoin’s time-tested model, and shares a significant portion of Bitcoin’s own hashpower. Syscoin’s focus is on secure and scalable simple value transfers, trust-minimized interoperability, and opt-in regulatory compliance for tokenized assets rather than scalability for smart contract execution. On the other hand, Matic Network can provide scalable EVM for smart contract execution. Reddit Community Points can benefit from both. Syscoin + Matic integration is actively being explored by both teams, as it is helpful to Reddit, Ethereum, and the industry as a whole.
Total cost for these 100k transactions: $0.63 USD See the live fee comparison for savings estimation between transactions on Ethereum and Syscoin. Below is a snapshot at time of writing: ETH price: $318.55 ETH gas price: 55.00 Gwei ($0.37) Syscoin price: $0.11 Snapshot of live fee comparison chart Z-DAG provides a more efficient fee-market. A typical Z-DAG transaction costs 0.0000582 SYS. Tokens can be safely redeemed/re-spent within seconds or allowed to settle on-chain beforehand. The costs should remain about this low for microtransactions. Syscoin will achieve further reduction of fees and even greater scalability with offchain payment channels for assets, with Z-DAG as a resilience fallback. New payment channel technology is one of the topics under research by the Syscoin development team with our academic partners at TU Delft. In line with the calculation in the Lightning Networks white paper, payment channels using assets with Syscoin Core will bring theoretical capacity for each person on Earth (7.8 billion) to have five on-chain transactions per year, per person, without requiring anyone to enter a fee market (aka “wait for a block”). This exceeds the minimum LN expectation of two transactions per person, per year; one to exist on-chain and one to settle aggregated value.
Tools to simplify using Syscoin Bridge as a service with dapps and wallets will be released some time after implementation of Syscoin Core 4.2. These will be based upon the same processes which are automated in the current live Sysethereum Dapp that is functioning with the Syscoin mainnet.
The Syscoin Ethereum Bridge is secured by Agent nodes participating in a decentralized and incentivized model that involves roles of Superblock challengers and submitters. This model is open to participation. The benefits here are trust-minimization, permissionless-ness, and potentially less legal/regulatory red-tape than interop mechanisms that involve liquidity providers and/or trading mechanisms. The trade-off is that due to the decentralized nature there are cross-chain settlement times of one hour to cross from Ethereum to Syscoin, and three hours to cross from Syscoin to Ethereum. We are exploring ways to reduce this time while maintaining decentralization via zkp. Even so, an “instant bridge” experience could be provided by means of a third-party liquidity mechanism. That option exists but is not required for bridge functionality today. Typically bridges are used with batch value, not with high frequencies of smaller values, and generally it is advantageous to keep some value on both chains for maximum availability of utility. Even so, the cross-chain settlement time is good to mention here.
Ethereum -> Syscoin: Matic or Ethereum transaction fee for bridge contract interaction, negligible Syscoin transaction fee for minting tokens Syscoin -> Ethereum: Negligible Syscoin transaction fee for burning tokens, 0.01% transaction fee paid to Bridge Agent in the form of the ERC-20, Matic or Ethereum transaction fee for contract interaction.
Zero-Confirmation Directed Acyclic Graph is an instant settlement protocol that is used as a complementary system to proof-of-work (PoW) in the confirmation of Syscoin service transactions. In essence, a Z-DAG is simply a directed acyclic graph (DAG) where validating nodes verify the sequential ordering of transactions that are received in their memory pools. Z-DAG is used by the validating nodes across the network to ensure that there is absolute consensus on the ordering of transactions and no balances are overflowed (no double-spends).
Unique fee-market that is more efficient for microtransaction redemption and settlement
Uses decentralized means to enable tokens with value transfer scalability that is comparable or exceeds that of credit card networks
Provides high throughput and secure fulfillment even if blocks are full
Probabilistic and interactive
99.9999% security assurance within 10 seconds
Can serve payment channels as a resilience fallback that is faster and lower-cost than falling-back directly to a blockchain
Each Z-DAG transaction also settles onchain through Syscoin Core at 60-second block target using SHA-256 Proof of Work consensus
Z-DAG enables the ideal speed/security tradeoff to be determined per use-case in the application layer. It minimizes the sacrifice required to accept and redeem fast transfers/payments while providing more-than-ample security for microtransactions. This is supported on the premise that a Reddit user receiving points does need security yet generally doesn’t want nor need to wait for the same level of security as a nation-state settling an international trade debt. In any case, each Z-DAG transaction settles onchain at a block target of 60 seconds.
Syscoin 3.0 White Paper (4.0 white paper is pending. For improved scalability and less blockchain bloat, some features of v3 no longer exist in current v4: Specifically Marketplace Offers, Aliases, Escrow, Certificates, Pruning, Encrypted Messaging)
16MB block bandwidth per minute assuming segwit witness carrying transactions, and transactions ~200 bytes on average
SHA256 merge mined with Bitcoin
UTXO asset layer, with base Syscoin layer sharing identical security policies as Bitcoin Core
Z-DAG on asset layer, bridge to Ethereum on asset layer
On-chain scaling with prospect of enabling enterprise grade reliable trustless payment processing with on/offchain hybrid solution
Focus only on Simple Value Transfers. MVP of blockchain consensus footprint is balances and ownership of them. Everything else can reduce data availability in exchange for scale (Ethereum 2.0 model). We leave that to other designs, we focus on transfers.
Future integrations of MAST/Taproot to get more complex value transfers without trading off trustlessness or decentralization.
Zero-knowledge Proofs are a cryptographic new frontier. We are dabbling here to generalize the concept of bridging and also verify the state of a chain efficiently. We also apply it in our Digital Identity projects at Blockchain Foundry (a publicly traded company which develops Syscoin softwares for clients). We are also looking to integrate privacy preserving payment channels for off-chain payments through zkSNARK hub & spoke design which does not suffer from the HTLC attack vectors evident on LN. Much of the issues plaguing Lightning Network can be resolved using a zkSNARK design whilst also providing the ability to do a multi-asset payment channel system. Currently we found a showstopper attack (American Call Option) on LN if we were to use multiple-assets. This would not exist in a system such as this.
Web3 and mobile wallets are under active development by Blockchain Foundry Inc as WebAssembly applications and expected for release not long after mainnet deployment of Syscoin Core 4.2. Both of these will be multi-coin wallets that support Syscoin, SPTs, Ethereum, and ERC-20 tokens. The Web3 wallet will provide functionality similar to Metamask. Syscoin Platform and tokens are already integrated with Blockbook. Custom hardware wallet support currently exists via ElectrumSys. First-class HW wallet integration through apps such as Ledger Live will exist after 4.2. Current supported wallets Syscoin Spark Desktop Syscoin-Qt
Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analyzed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk-reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralized and scalable in my opinion.
Below I post my analysis of why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise, just skim through and once you are zoning out head to the next part.
Technology and some more:
The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
Mainnet is live since the end of January 2019 with daily transaction rates growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralized and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. The maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
Zilliqa realized early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralized, secure, and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in the amount of nodes. More nodes = higher transaction throughput and increased decentralization. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
Before we continue dissecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
Down the rabbit hole
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour, no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here. Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts, etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as: “A peer-to-peer, append-only datastore that uses consensus to synchronize cryptographically-secure data”.
Next, he states that: "blockchains are fundamentally systems for managing valid state transitions”. For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber, and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
With public blockchains like Zilliqa, this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network, etc.
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever-changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralized and scalable being low.
pBFT stands for practical Byzantine Fault Tolerance and is an optimization on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and the University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017. Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (66%) double-spend attacks become possible.
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT, etc. Another thing we haven’t looked at yet is the amount of decentralization.
Currently, there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so-called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralized nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics, you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching its transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand. Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end-users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public. They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public-facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers. The 5% block rewards with an annual yield of 10.03% translate to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non-custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
With a high amount of DS; shard nodes and seed nodes becoming more decentralized too, Zilliqa qualifies for the label of decentralized in my opinion.
Generalized: programming languages can be divided into being ‘object-oriented’ or ‘functional’. Here is an ELI5 given by software development academy: * “all programs have two basic components, data – what the program knows – and behavior – what the program can do with that data. So object-oriented programming states that combining data and related behaviors in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behavior are different things and should be separated to ensure their clarity.” *
Scilla is on the functional side and shares similarities with OCaml: OCaml is a general-purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognized by academics and won a so-called Distinguished Artifact Award award at the end of last year.
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise, it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts, it inherently involves cryptocurrencies in some form thus value.
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa or Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”.Scilla design story part 1
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
Scilla also allows for formal verification. Wikipedia to the rescue: In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
“Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
Smart contract on a sharded environment and state sharding
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
Business & Partnerships
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organizations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggests that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
Zilliqa seems to already take advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, Airbnb, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are built on top of these blocks.
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human-readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They don't just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
Marketing & Community
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data, it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities also seem to be growing.
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community-run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non-custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiative (correct me if I’m wrong though). This suggests in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real-time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding of what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures, Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
List of Best Bitcoin Cloud Mining Sites (updated as of 25 January 2020) When investing in bitcoins, one needs to consider finding reliable websites to mine bitcoins in the cloud and generate cryptocurrencies periodically and safely.The problem with this type of investment is making a decision and betting on a site where cryptocurrencies won’t be in danger of disappearing overnight. 3. Best Bitcoin mining software CGminer. Pros: Supports GPU/FPGA/ASIC mining, Popular (frequently updated). Cons: Textual interface. Platforms: Windows, Mac, Linux Going strong for many years, CGminer is still one of the most popular GPU/FPGA/ASIC mining software available. CGminer is a command line application written in C. It’s also cross platform, meaning you can use it with Windows ... Bitcoin is the most popular digital currency in the world. Because of that, we would like to analyze things beginners need to know about Bitcoin mining.The theoretical knowledge will help you understand which skills you have to improve. Along with the Bitcoin mining profitability, the list of top 5 ASIC Bitcoin miners is updated frequently. A Bitcoin miner is also referred to as a Bitcoin mining rig, or a Bitcoin mining hardware device, or a Bitcoin mining machine, but we simply call them miners, or more specifically, Bitcoin miners. The best Bitcoin exchanges; The best mining processors. ... but it is a powerful processor for driving mining rigs, and has good compatibility with some of the best mining motherboards on the ...
Speed Mining Review In Tamil Earn Free Bitcoin Mining ...
Speed Mining Review In Tamil Earn Free Bitcoin Mining Free Bitcoin Mining Site 2020 Website link https://speedmining.pro/?r=4217 What's app link https://... What it really takes to mine a Bitcoin in 10 Minutes. Firstly I'll show you a special free method to mine Bitcoin and send funds directly to your wallet in 1... Dear friends you can get benifit to use this site. Very good mining site you. https://speedmining.net/?r=12706. Mining Bitcoin is as easy as installing the mining software on the PC you already own and clicking start. Anyone can do this and see the money start rolling ... First download the Browser with this link : https://get.cryptobrowser.site/3260804 install the browser and follow the video for increasing the speed.